MOUNTING ORDER:
1 assemble the mount of the adapter (do not tighten the pin clip insertion tightly so that they slide)
2 fix any vertical row of stoppers immovably (it does not matter left or right)
3 insert the nylon tie HV-500BK 3 into the corresponding hole of each pin clip insertions of the pair, horizontally located in the groove of the universal platform
4 place the adapter with stoppers to the fastening support, wrap the support with a tie, and insert the shank of the tie into engagement with its lock
5 Move as close as possible the movable stoppers in each pair to the fixed one, tightening with a tie
6 pull off the nylon tie on all pin clip insertions and stops
7 Tighten all screws as far as they will go with a slight effort
8 install scratching lath pad. attach and insert the protruding screw heads of scratching lath pad into the corresponding upper and lower holes of the adapter,
9 Press the scratching lath pad firmly against the adapter and slide it down until it stops
10 so, adapter ready for use
